How to Connect a Victron Cerbo GX to a WiFi Network

To connect your Cerbo GX to a WiFi network:

1. On the Cerbo GX screen (or via the Remote Console), go to Settings → Network → WiFi.
2. Ensure the Create access point slider is turned on (blue).
3. Tap Wi-Fi networks and choose your WiFi network (SSID) from the list.
4. Carefully enter your WiFi password and confirm.

Your Wi-Fi network should show as Connected and your Cerbo will start communicating with the Victron VRM Portal.

If the connection does not work, double-check your password, ensure the WiFi signal is strong, turn off any VPN connections and confirm your router is not blocking new devices.

For a full step-by-step walkthrough, watch this video tutorial: Connecting Victron Cerbo GX to Wi-Fi for Remote Support: A Step-by-Step Guide

.